CE marking concerning for the Construction Product (No.305/2011/EU-CPR) including wallpapers, insulation, flooring, fibers, window and door, Geotextile, pigments, etc
Member Login
  • UserName:
  • Password:
Business Sectors
Services
Cooperation
Contact Us
Address:16F Deying Mansion, No.118 Middle Jiangdong Road, Nanjing, Jiangsu, China
Tel :(+86) 25-8658 3475
Fax:(+86) 25-8658 3457
Email:info@hksmartps.com
Website:www.hksmartps.com
KEYMARK
Published:2009-7-15 11:48:01   Read:2762

1111 

 The Keymark is a voluntary third-party European certification mark, demonstrating to the consumer or user of a product that it is in conformity with the relevant European Standard(s). The Keymark can also be used for services.

Whereas CE-marking shows the observance of legal minimum requirements, the KEYMARK provides a real surplus value for the consumer: tested and certified observance of uniform European Quality Standards. The legally requested CE-marking for certain products can be completed thereby in a meaningful way.


A product may only be marked with the KEYMARK, if it was tested and certified before by a neutral, independent and competent body. The factory inspection and Initial Type Testing (ITT), apart from the regular inspection, constitute an important element of the procedure for granting the KEYMARK.

Beyond that, the manufacturer has to carry out a Factory Production Control (FPC) in consideration of the relevant product standards and the elements of the EN ISO 9000 series. This quality system is controlled by an annual inspection and is completed by type testing which takes place at least every 2 years.

Since the introduction of revised rules for this European certification mark in 2001, there has been a steady increase of European Standards, products and certification bodies involved. At the moment 24 certification bodies in 15 different European Member States operate Keymark Schemes on the basis of some 145 European Standards.


Procedure of Keymark

  • Application of the manufacture
  • Factory inspection and product testing
  • Inspection of the factory production control

  • Product Scope of Keymark:

    • Cast iron pipes, fittings and their joints
    • Ceramic tiles
    • Concrete and related products
    • Elastomeric seals for joints in pipework and pipelines
    • Eye protective equipment
    • Fire service equipment
    • Food processing machinery - Safety and hygiene specifications
    • Foot and leg protectors
    • Furniture
    • Head protection
    • Heat cost allocation
    • Ladders
    • Manual means of fire fighting equipment
    • Non-active medical devices
    • Plastics)
    • Plastics piping systems and ducting systems)
    • Road equipment
    • Roof covering products for discontinuous laying and products for wall cladding
    • Safety of toys
    • Space heating appliances without integral heat sources
    • Thermal insulating materials and products
    • Thermal solar systems and components
    • Timber structures
    • Waste water engineering
    • Water supply
    • Welding
    • Wood-based panels


    Tel: +86 25 8658 3475