1.标准名称—EN 13956:2005(防水卷材CE认证)
EN 13956:2005--Flexible sheet for waterproofing-Plastic and rubber sheets for roof waterproofing-Definitions and characteristics
EN 13956:2005--防水柔性板——防水柔性板屋顶防水用塑料和橡胶薄板
2.防水卷材CE认证强制时间
...
1.标准名称—EN 13956:2005(防水卷材CE认证)
EN 13956:2005--Flexible sheet for waterproofing-Plastic and rubber sheets for roof waterproofing-Definitions and characteristics
EN 13956:2005--防水柔性板——防水柔性板屋顶防水用塑料和橡胶薄板
2.防水卷材CE认证强制时间
...
1. 标准名称—EN 13859-2:2004 (防水卷材CE认证)
EN 13859-2:2004--Flexible sheets for waterproofing-Definitions and characteristics of underlays-Part1:Underlays for walls
EN 13859-2:2004--防水柔性板——衬垫物定义和性能:墙壁用衬垫防水渗透性测定
2. 防水卷材CE认证强制时间
...
1. 标准名称—EN 13859-1:2005(防水卷材CE认证)
EN 13859-1:2005--Flexible sheets for waterproofing-Definitions and characteristics of underlays-Part1: Underlays for discontinuous roofing
EN 13859-1:2005--防水柔性板——衬垫物定义和性能:非连续式屋顶渗透性测定
1. 标准名称—EN 13984:2004(防水卷材CE认证)
EN 13707:2004--Flexible sheets for waterproofing-Reinforced bitumen sheets for roof waterproofing-Definitions and characteristics
EN 13707:2004--防水柔性板——防水柔性板屋顶防水沥青板接头剪切抗性的测定
2. 防水卷材CE认证强制时间
...
EN14307:2009 Thermal insulation products for building equipment and industrial installations - Factory made extruded polystyrene foam (XPS) products – Specification EN14307:2009工业装置和建筑设备用热绝缘产品 工厂制挤压聚苯乙烯泡沫产品规范
从2011年起,所有在欧盟市场销售的XPS聚苯乙烯泡沫产品都必须通过CE认证,其产品加贴CE标识,才能在市场范围内销售。XPS聚苯乙烯泡沫产品CE认证根据EN14307:2009标准进行CE认证。
...EN14314 Thermal insulation products for building equipment and industrial installations -Factory made phenolic foam(PF)products-Specification.
工业装置和建筑设备用热绝缘产品. 工厂制酚醛泡沫(PF)产品规范
EN14314标准范围
The EN14314 Standard specifies the requirements for factory made phenolic foam products which are used for the thermal insulation of building equipment and industrial installations with an operating temperature in the range of approximately -200℃ to +120℃.
EN14313 Thermal insulation products for building equipment and industrial installations -Factory made polyethylene foam(PEF)products-Specification.
EN14313工业装置和建筑设备用隔热产品工厂制聚乙烯泡沫(PEF)产品规范
EN14313标准范围
The EN14313 Standard specifies the requirements for factory made flexible polyethylene foam products which are used for the thermal insulation of building equipment and industrial installations with an operating temperature in the range of approximately -80℃ to +150℃.
EN14309 Thermal insulation products for building equipment and industrial installations -Factory made expanded polystyrene(EPS)products-Specification.
EN14309 工业装置和建筑设备用热绝缘产品. 工厂制发泡聚苯乙烯(EPS)产品.
EN14309标准范围
The EN14309 Standard specifies the requirements for factory made products of expanded polystyrene which are used for the thermal insulation of building equipment and industrial installations with an operating temperature in the range of approximately -180℃ to +80℃. Modified expanded polystyrene polymers with a higher temperature resistance are also covered by this standard.
EN14308:2009 Thermal insulation products for building equipment and industrial installations - Factory made rigid polyurethane foam (PUR) and polyisocyanurate foam (PIR) products - Specification
EN14308:2009 建筑设备和工业装置的隔热保温产品. 硬质聚氨酯泡沫及聚异氰脲酸酯产品.
EN14307 Thermal insulation products for building equipment and industrial installations -Factory made extruded polystyrene foam(XPS)products-Specification.
EN14307建筑设备和工业设施用隔热制品.工厂制挤压泡沫聚苯乙烯(XPS)产品.规范。
EN14307标准范围
The EN14307 Standard specifies the requirements for factory made extruded polystyrene foam products which are used for the thermal insulation of building equipment and industrial installations with an operating temperature in the range of approximately -180℃ to +75℃。